SUPRA 7 - MECHANISM WITH OFFSET HANDLE

Technical Characteristics

The Supra 7 window handles can be combined with the Giesse sash, Tilt-and-turn, Side Hung, Top Hung and Sliding movements and mechanisms which have a rotor with a 7 mm square slot.
The mechanism / movement must be firmly and independently fixed to the sash profile and receive the motion from the 7 mm pin of the Supra 7 window handle.
The machining to be carried out on the sash profile is simple and fast and Giesse has created 2 drilling templates to facilitate the operations (art. 03546 and art. 03547).
The product application takes place in 2 steps: first of all the base is fixed, with the integrated 7 mm pin, to the sash profile by means of the 4 TORX screws and then, after having pressed the handle firmly on the base, the pre-assem-bled grub screw is completed screwed onto the handle.
The supply includes 2 snap disks to be chosen based on the geometry of the sash profile.
The 7 mm square pin protrudes from the window handle support plane of 45 mm.
On request the length of the pin can be changed