DOMINA HP HINGE, CORNER

Technical Characteristics

Hinge suitable for doors subject to intensive use (use category 4* - heavy duty use) with high resistance to fatigue and wear (durability grade 7* - 200,000 test cycles). Ideal for the assembly of doors characterized by large dimensions, heavy weight and intensive use. Adjustable in 3 directions with or without door installed: - micrometric side adjustment (±2.5 mm) with door installed, obtainable by turning the side adjustment screw located in the sash hinge cartridge. The locking grub screw, located on the sash hinge, locks the side adjustment cartridge in the chosen position. - compression micrometric adjustment (±0.5 mm), obtainable by turning the bushing of the frame hinge (adjuster key art.05053). The special plug locks the compression adjustment, leaving access to the height adjustment. - micrometric vertical adjustment (0/+4 mm), obtainable by turning the grub screw located at the bottom of the frame part of the hinge The frame hinge component is equipped with centering bushes. The internal parts of the hinge are completely preassembled in two groups: - pin cartridge for side adjustment - cartridge with thrust bush for height and compression adjustments The screw concealer plate of the frame hinge leaf cannot be removed from the outside and the screw concealer plate of the sash hinge leaf is secured by a pull screw driven from the inside, likewise removable only with the sash open (tamper-proof). The hinge can be combined with counterplate kit, with expansion dowels for single sealed unit profiles and with M12 direct fixing screws for thermal break profiles. Profile can be prepared with Ø11 mm holes (for all fixing systems) using drill template item 05050. The hinge is supplied with two M8 screws of dissimilar length that replace those supplied with the kit selected for fixing to the frame profile. The locking clip, item 05051, facilitates the operation of fixing the screw-cover plates to the hinge. * Complies with EN 1935