GS1000-HD HARDWARE

Technical Characteristics

The fastening system uses the special fastening mechanism with LOGICA opening with which operating the cremone produces first tilt opening and thenslide opening.
The particular shape of the arms of the special hardware allows semi-automatic return of the sash into the bottom-hung opening position and into the closing position.
The hardware set uses fixed strikers and adjustable pawls (±1.2 mm) to optimize the perimeter pressure of the sash.
The hardware components are pre-assembled and are attached to the profile with Torx screws.
It is possible to add up to two additional locking points, depending on the size of the sash.
The hardware set consists of:
• no. 3 corner drives to transmit the motion between the uprights and crossbeams, to be secured to the profile with Torx screws
• no. 1 cremone drive rod
• no. 2 opening arms + sliders
• no. 2 spring latches (matching the set of strikers sold separately)
• no. 3 fastening mechanism rods
• no. 8 locking points (adjustable pawls + fixed strikers)
• no. 1 sticker for correct system operation
• no. 1 arm and pulley release device