GS1000-ML AND GS1000-HL HARDWARE

Technical Characteristics

The fastening system uses the Futura tilt-and-turn fastening mechanism with a polyamide rod and LOGICA opening (*) with which operating the cremone produces first tilt opening, then slide opening.
The Euro groove hardware set uses fixed pawls and adjustable strikers (± 1.8 mm) with which you can optimize the perimeter pressure of the sash.
The R40 hardware set instead has fixed strikers and adjustable pawls (± 1.2mm).
The hardware components are pre-assembled and are attached to the profile with contrast grubscrews, without any specific machining.
It is possible to add up to four additional locking points, depending on the size of the sash.
The hardware set consists of:
• no. 3 corner drives to transmit the motion between the uprights and crossbeams, to be secured to the profile with interlocking clips
• no. 1 cremone drive rod + no.1 incorrect movement safety striker (not included in the window handle hardware set)
• no. 8 locking points (pawls + strikers)
• no. 2 spring latches + strikers for the automatic locking system (not available in the version for R40)
• no. 2 connection rods with fastening mechanism pawl
• no. 1 lift-proof system (block + striker)
• no. 2 incorrect movement safety plates for cremones (1 right + 1 left) to replace the one supplied with the standard cremone
• no. 1 sticker for correct system operation
(*) excluding the configuration for R40