DOMINA CLASSIC HINGE

Technical Characteristics

Hinge suitable for doors subject to intensive use (use category 4* - heavy duty use) with high resistance to fatigue and wear (durability grade 7* - 200,000 test cycles). Ideal for the assembly of doors characterized by large dimensions, heavy weight and intensive use. Adjustments in three directions: - micrometric side adjustment (±2.5 mm) with door installed, obtainable by turning the adjustment screw located in the sash hinge cartridge - micrometric vertical adjustment (0-4 mm) with door installed, obtainable by turning the grub screw located at the bottom of the frame part of the hinge, using the special adapter supplied with the product - compression adjustment (± 0.5 mm), obtainable by turning the eccentric bush in the frame part of the hinge to the angular position required. Screw-cover plates fixed to hinge using pull screws driven from the inside (for locking purposes use clip item 05051), removable only with the sash open (tamper-proof). For combination with counterplate kit, with expansion dowels for single sealed unit profiles and with M12 direct fixing screws for thermal break profiles. Profile can be prepared with Ø11 mm holes (for all fixing systems) using drill templates item 03237 and item 05052 When applied to a non-flush profile, the hinge is fitted in combination with shim steps selected according to the type of fixing used for the profile: - steps with centering bushes: for counterplate kit and expansion dowels for single sealed unit profile - steps without centering bushes: for M12 direct fixing screws. * Complies with EN 1935